The NVELOPE interiors range is made from high strength alloys but is light weight; quick to install and therefore economical.
There are various fixing options available; face fixed (NV1) secret adhesive fixing (NV2) and secret mechanical fixing (NV3) Stainless steel fixings should be used. This system is suitable for fixing back to Steel frame or concrete
NVELOPE's new interiors range is composed of smaller helping hand brackets and an extra alternative to the L and T rails. This interiors range is compatible with systems NV1, NV2 & NV3 allowing the architect to choose from a range of façade materials and fixing techniques. The new range of brackets gives a minimum stand-off of 35mm and allows for material flow from the external façade to the interior wall. The maximum adjustment of the 35mm bracket is 15mm; please see table of adjustment below.
NVELOPE Interiors – System |
|||
Component |
Size (mm) |
6.5mm For steel / timber frame |
11mm For concrete block |
Brackets |
35 |
VB35S-6.5 single |
VB35S-11 single |
|
40 |
VB40S-6.5 single ~ VB40D-6.5 double |
VB40S-11 single ~ VB40D-11 double |
|
55 |
VB55S-6.5 single ~ VB55D-6.5 double |
VB55S-11 single ~ VB55D-11 double |
T rail |
|
02/T40-100-2.2-3000 for 40mm brackets |
40 x 100 x 2.2mm for 40mm brackets |
|
|
02/T40-100-2.2-6000 for 40mm brackets |
40 x 100 x 2.2mm for 40mm brackets |
L rail |
|
L60-35-2.4-5000 for 35mm brackets |
60 X 35 X 2.4mm L available in 5m lengths |
|
|
02/L60-40-3000 |
60 x 40 x 2.2mm L available in 3m lengths |
|
|
02/L60-40-6000 |
60 x 40 x 2.2mm L available in 6m lengths |
NV2 |
Component |
Reference |
Detail |
Sika |
|
|
|
Adhesive - 600cc 'sausage' |
STS-600 |
600cc = 13 metre coverage |
|
Adhesive - 600cc 'sausage' |
STS-50-600 |
600cc = 13 metre coverage |
|
Tape (33m) |
STT-33M |
33m coverage |
|
Activator 205 |
STA-205-1LTR |
285m coverage (50mm wide) |
|
Primer 1ltr |
STPP-1LTR |
125cm coverage (50mm wide) |
NV3** |
Component |
Reference |
Detail |
|
Main NV3 horizontal rail |
CP-NV3-3000 |
3000 = 3 metre length (can be 6 m) |
||
Adjustable hangers |
NV3-PTS-ADJF |
NV3-KEIL-ADFG |
Either / or PTS or KEIL Supplied with an adjusting screw |
|
Fixed hangers |
NV3-PTS-STAT |
NV3-KEIL-STAT |
||
Fixings |
||||
SR2 4.2 x 16 |
4.2-16 |
Rail to bracket |
||
SR2 4.8 x 19 |
4.2-19 |
Main horizontal rail to 50x50 2.2 L rail |
||
Hanger securing screw |
04/SN3-4.8-50 |
4.8mm x 50mm securing screw |
||
PTS screws 11.5 |
PTS-60/11.5 |
HPL / board (10mm) |
||
PTS screws 14.5 |
PTS-60/14.5 |
HPL / board (13mm) |
||
Keil anchors |
On request |
Thin stone / ceramic / fibre cement |
Range of Adjustment (Single / Double - 6.5mm / 11mm) |
||
Size (mm) |
Min (mm) |
Max (mm) |
NVELOPE 35 No isolators* |
37 |
52 |
NVELOPE 40 No isolators* |
42 |
62 |
NVELOPE 55 No isolators* |
57 |
97 |
*Plus 5mm if isolators fitted **For NV3 +26mm to above dims |