NV4 elements – Trespa Meteon HPL.
NV4 (ts200) is the NVELOPE system for concealed fix/mechanically fixed applications – vertical cladding applications – Trespa.
Horizontal NVELOPE channel profiles are fixed to the vertical profiles. Rainscreen panels are hung from and secured to the horizontal profiles with hangers and adjustable hangers.
NVELOPE 'T' and 'L' profiles are fixed using NVELOPE support brackets, fixed through a series of fixed and flexible points.
NVELOPE flexible point brackets absorb wind loading and allow for expansion and contraction.
NVELOPE fixed point brackets absorb both vertical dead loads.
NVELOPE bracket spacing is determined by cladding options such as the dimensions and weight of the facade cladding, local wind loads.
Material:
Manufactured from extruded aluminium alloys conforming to EN 573-3 (material) and EN 755 production standards.
Approvals:
British Board of Agrément (BBA) - 09/4678
Options:
NVELOPE brackets (V): allows adjustment between the face of the primary support to outer face of vertical profile. Thermal isolators: hard PVC isolator assembled as standard (located between the NVELOPE bracket and the primary structural support system).
Download NV4 technical spec here
Download NV4 Installer guide here
NV4 = NV1 + NV4 Components (mechanical concealed fix) |
|||
Select NV1 components (bracket and rail) - then - select NV4 components |
|||
Component |
Reference |
Detail |
|
Main NV4 horizontal (ts200) rail |
CP-NV4-3000 |
3000 = 3 metre length (can be 6m) |
|
Adjustable hanger |
NV4-ADFG |
Supplied with an adjusting screw |
|
Fixed hanger |
NV4-STAT |
|
|
Fixings |
|||
Hanger securing screw |
04/SN3-4.8-50 |
4.8mm x 50mm securing screw |
|
TUF-S Fastener |
On request |
HPL / board |
|
PTS screws 11.5 |
PTS-60/11.5 |
HPL / board (10mm) |
|
PTS screws 14.5 |
PTS-60/14.5 |
HPL / board (13mm) |
Size (mm) |
Min (mm) |
Max (mm) |
40 |
79 |
99 |
60 |
94 |
134 |
90 |
124 |
164 |
120 |
154 |
194 |
150 |
184 |
224 |
180 |
214 |
254 |
210 |
244 |
284 |
240 |
274 |
314 |
270 |
304 |
344 |
300 |
334 |
374 |
6.5mm holes (suitable for steel and / or timber substrates) / 11mm holes (suitable for block / concrete substrates) Includes NV4 (ts200) rail and hanger (32mm). NVELOPE isolators: Included as standard - if isolator not required reduce dimensions by 5mm |
||
Profiles |
||
(L) 60 x 40mm |